It’s not until further on that the effectiveness of a lift-station will be determined. The design of the final lift station is influenced by many factors, including the flow calculation, the elevations of the site, system pressures, wastewater characteristics, peak conditions accessibility to maintenance, control systems, and the future capacity.
For project owners comparing the top lift station designers, the more useful question isn’t who will design the pumps. Who can translate the conditions of the site into a practical, complete system that is simple to install, maintain, and use?
Image credit: romtecutilities.com
The Limits of Gravity
Gravity is the most efficient means to transport wastewater. However the development patterns and terrain don’t always work in favor of this method. New commercial, residential, and industrial buildings may be in a position that is too low, or too distant, or in locations where extending gravity sewer infrastructure isn’t practical.
A lift station can provide the force needed to transfer water from one location in the collection system to another. But designing one involves understanding normal operations as well as more difficult circumstances like a high flow and maintenance of pumps, equipment malfunctions or upcoming increases in demands.
The most reputable companies for wastewater design must analyze the whole issue rather than just treating the station.
Existing Infrastructure Complicates the Puzzle
New construction isn’t the only issue. While maintaining essential wastewater infrastructure, municipalities often need to replace or upgrade aging stations.
Infrastructure in place, like wet wells, control systems, force mains along with site boundaries and downstream infrastructure can restrict the design. Engineers must consider what components can be left in place, what will require replacement and how the new elements can be integrated into the existing system.
Romtec Utilities offers pumping solutions for municipal, private, industrial, commercial and retrofit projects. Pumping systems are adapted to meet the particular requirements of every project.
Stormwater is subject to different rules
The best stromwater system designers using the supplied search terminology must solve a different hydraulic problem. Stormwater systems can undergo dramatic variations in volume, based on rainfall, drainage area, capacity for detention, and permissible discharge rates.
Stations serving detention basins, for instance, could need to temporarily store runoff until pumping it out in a controlled manner. Engineers should take into consideration flow and head conditions, environmental needs and objectives for flood management, as well as the characteristics of the receiving drain system.
Prefabrication is a way to move work From the Jobsite
Complex field assembly presents opportunities for conflicting schedules, installation errors or change orders and delays. Romtec Utilities performs significant prefabrication of equipment prior to the construction location.
In order to complete more assembly and quality assurance work within a controlled atmosphere this can decrease the amount of work required on the ground. Romtec Utilities’ approach to project management can reduce the amount of time needed to construct certain types of installations.
The Commissioning Process is a Key to Engineering Success
It’s not enough to put in all the parts for a station to be regarded as a dependable one. Romtec Utilities offers installation advisors to help with the construction process such as startup check of the control panel as well as pump operations, system testing and personnel training. Documentation is also accessible to give operators information on how to maintain the system and consider future expansion.
If you are looking for the best lift station designers, that last stage is worth a lot of attention. A good engineering project should result in more than just an acceptable set of drawings. The station’s owner should have a fully functional system, well-trained staff, useful documentation and equipment designed for the conditions that the station is likely to encounter in its day-to-day operations.